跳至主要内容

How can we improve the production efficiency of dry mortar mixer machinery

Everyone in the choice of the purchase of dry mortar mixing production equipment, generally agreed that the larger the capacity of the hybrid host, the higher the power, the production efficiency can be improved, although this idea is feasible, but also flaws. After ten years of sales experience and customer return visit, in the production practice, summed up the dry mortar to improve production efficiency, not only the host capacity and power size, but also according to the production line in the equipment and equipment between the reasonable match , the production process of mechanical intelligence and the degree of automation, determine the level of production efficiency.
       
Today, most of the production equipment of the feed are used artificial throwing, which not only increased the degree of labor workers, but also increased production costs, production efficiency is also greatly reduced. In order to break this layout, the direct use of the raw material tank to raise, with a screw conveyor into the weighing warehouse, weighing, and then by the bucket elevator to the material into the vertical mix, waiting for the raw materials with a good , And then into the mixing host, stirring mixing. This not only improves production efficiency but also greatly reduces the production time and the labor intensity of the workers.
 
According to customer feedback, the current production of the host is 2m ³, the daily output is 80 tons, if the host changed to 4m ³, whether to make the daily output doubled? The result is certainly not work. Because in the configuration of the production line, the material into the material delivery device, with a mixed warehouse, finished goods warehouse, packaging machines are set for the 2m ³, if a single change the size of the hybrid host, regardless of the reasonable match before and after, like a head Is the bottleneck, belly and then also subject to the bottleneck. If you really want to achieve the increase in production, only to achieve a reasonable match.


标签：

评论

发表评论

此博客中的热门博文

Electrical system of powder dry mortar production line

Dry powder mortar equipment test heavy load, commissioning to meet the conditions   First, the electrical (instrument) control and control systems and instrumentation adjustment test.   Second, lubrication, gas (steam) dynamic inspection and adjustment test.   Third, the mechanical and the system to adjust the joint test.   Fourth, the empty load test run, should be in the above one to three adjustment test after passing. Dry powder mortar production line  of the electrical system to meet the conditions can be debugged:   First, according to the electrical schematic diagram and the installation wiring diagram, the equipment internal wiring and external wiring should be correct.   Second, according to the type of power, grade and capacity, check or debug its cut capacity, fuse capacity, overvoltage, undervoltage, overcurrent protection, inspection or debugging content should meet its requirements.   Third, according t...
发表评论
阅读全文

How to properly use dry mortar mixing equipment?

Proper use of  dry mortar mixing equipment  points: 1, Dry powder mortar equipment should be set in a flat position, with a wooden mat before and after the axle, so that the tire put overhead, so as not to move around, the occurrence of moving. 2, Dry mortar equipment should be implemented, two leakage protection, power supply after work connected, you must carefully check the empty car trial that qualified, before use. When the test run, should check the mixing cylinder speed, is appropriate, under normal circumstances, the empty speed than the car (after loading) slightly faster 2 to 3 turn, such as the difference is more, should adjust the ratio of wheel and transmission wheel. 3,The direction of rotation of the mixing cylinder should be consistent with the direction of the arrow, if not true, should correct the motor wiring. The following are the same as the " 4, Check the transmission clutch and brake is flexible and reliable, whether the damage to the ro...
发表评论
阅读全文

Trends of dry powder mortar industry

What is  dry powder mortar ? Dry mortar refers to the dry, sieved treatment of aggregate (such as quartz sand), inorganic cementing materials (such as cement) and additives (such as polymers) and other raw materials, according to a certain proportion of physical mixing, and the formation of a Granular or powdery, in the form of bags or bulk, transported to the site, add water can be used directly after mixing the material.   Dry mortar we also known as mortar dry powder, dry mixing, dry mix ing  powder, and some building adhesives also belong to this category. Dry mortar in the construction industry to play a thin layer of bonding, liner, protection and decoration role, construction and decoration works is widely used.      At present, the domestic construction of dry mortar production and application, has formed a new industry for the housing industry, to create new growth points. Dry powder mortar, the general use of fly ash and other industrial ...
发表评论
阅读全文